SOMAT Close-Coupled Pulper Hydra-Extractor.
Model #SPC-755HT
Dimensions:
Total Height: 66” (1677mm)
Equipment weight: 900 lbs. (408kg)
Tank Height: 43” (1093mm)
Operating weight: 1155 lbs. (524kg)
Length: 67.25”(1709)
Crated weight: 1275 lbs. (533kg)
Width: 30” (762mm)
Crated volume: 167 cu. ft.
Used: Unit is working and has very little use. Unit has 414 hours on it. Then it has sat for a few years.
It was dismantled and removed on 07/25/2013.
It is like a giant garbage disposal, pulverizer, shredder & etc.
Sells for $52,000.00
DESCRIPTION:
Standard SOMAT Model SPC-75S HT high tank, close-coupled pulper and Hydra-Extractor with hinged lid and limit switch, water flushed feed tray, 3 HP recirculating pump, chemical additive pump, valve package, Som-A-Trol control panel with water level control, push button station, and discharge chute with limit switch.
Benefits:
As much as 8 to1 (87.5%) volume reduction
Reduced labor cost
Better sanitation
Water conservation
Improved operator morale
Reduced silverware loss
Processes a wide variety of waste
Operation:
Food service waste enters the pulping tank via the feed tray where it mixes with water, is processed and made into a slurry. The slurry, consisting of 5% solids and 95% water, is automatically transported through a pipeline to the Hydra-Extractor, where water is removed and the result-ant semi-dry pulp is discharged into a haul-away container.
The extracted water is recovered and returned to the pulping tank for re-use. Somat equipment provides an economic and efficient answer to cutting the high and ever increasing costs associated with waste handling.
Technical Specs:
Pulper: 30” diameter, 39.5” high polished stainless steel tank with water flushed feed tray, hinged lid with limit switch, 3/8” thick stainless steel slurry chamber, 7-1/2 HP TEFC direct drive motor, internal junk box and cutting mechanism, HyPoint cutting mechanism, stainless steel, consists of 1 piece security ring with 3 stationary, replaceable top cutters and impeller with 2 replaceable rotating cutters.
Hydra-Extractor:
Rigid stainless steel weldment with stainless steel legs, head assembly with 2 HP TEFC drive motor mounted to a 20:1 gear reducer, 17” long stainless steel discharge chute with limit switch, 3HP TEFC recirculating pump and chemical additive pump. Water extracting mechanism consists of 6” diameter stainless steel screw with nylon brush edge, stainless steel plug cutter and matching 6” diameter reinforced stainless steel screen, automatic rinse system with automatic shutdown timer.
Valve Package:
All valves required for proper operation (fresh water, tray flush and drain lines).
Som-A-Trol (Electrical Control Panel):
UL approved. Includes all necessary electrical components prewired to a terminal strip; water level control and push button station, in a NEMA 4 stainless steel enclosure.
Additional Prep Fees May Apply
