TheBeckman Optima TLX ultracentrifuge,is a tabletop model designed for a variety of high-speed applications. Along with operator safety, the Beckman ultracentrifuge system prioritizes maximum performance capabilities with a force of 657,000 x g and sample volumes ranging from 0.2 mL to 5.1 mL per tube.
The Beckman Optima TLX centrifuge offers enhanced operator convenience. Equipped with an easy to use control panel, this Beckman centrifuge also has a temperature control system, a self-purging vacuum system and a programmable memory that can store up to 10 different profiles and more.
The control panel of this Optima ultracentrifuge system is located on top of the machine for convenience and easy access and visibility. During a run, the actual condition is shown in the control panel including speed, temperature, and time. The thermoelectric temperature control system uses forced air and doesnt require any coolant.
**Does NOT include rotor.
Manufacture Specification
Approximate Acceleration Time 10 acceleration profiles 9 slow rates from 0 to 5,000 rpm followed by full acceleration to set speed; or maximum acceleration
Approximate Deceleration Time11 deceleration profiles 10 slow rates from 5,000 to 0 rpm, including coasting to a stop without brake; or full dynamic braking from set speed
Maximum Heat Dissipation into Room under Steady-State Conditions0.5 kW (1,750 Btu/hr)
Noise Level 1 Meter in Front of Centrifuge < 60 dBA
Set Speed Actual rotor speed 50 rpm of set speed
Set Temperature2 to 40C in 0.1 increments
Set Time to 99 hr 59 min
Speed Range 5,000 to 120,000 rpm
Temperature Control 2C of set temperature
(after equilibration)
Ambient Temperature Range 15 to 35C ambient
Clearances Required 7.6 cm (3.0 in) both sides and rear
Humidity Restrictions < 95% (noncondensing
Pollution Degree 2
Time Actual Display Indicates run time remaining
Additional Prep Fees May Apply