This unit is perfect working condition and recently received new diamond blade cutters
Description Below
Table-top model removes saw marks and produces a clear, polished edge on acrylic parts…all in a single pass through the machine.
The EF-200 Edge Finisher puts a flat, clear, smooth finish on the edge of a saw-cut plastic work piece.
The work piece is placed with the cut edge down on the surface of the machine.
Two precision, gear-driven belt assemblies feed the plastic piece across a special diamond cutter mounted on a super precise spindle.
The spindle rotates at a rate of speed of 18,000 RPM.
The belt assemblies keep the tension on the plastic piece constant and smooth as it moves through.
When the work piece exits the belt feed drive, the scratches and marks from sawing are gone – the edge is as flat and clear as the surface of the piece.
The EF-200 handles workpieces up to 3/4″ thick which can be stacked and fed simultaneously.
Feed belt assemblies can swing out to permit easy access to the cutter and are completely protected by safety guards.
A complete set of tools for setup, adjustment, and operation is furnished with each machine, along with a depth indicator and base for setting cutter height.
EF-200 diamond cutter is 3/4 inches.
Now, buy EF-200 with cutter to get an extra cutter – free!
Additional Prep Fees May Apply