LANSING G-28 HOLLOW SPINDLE ENGINE LATHE 9 1/4" THROUGH HOLE 23"/37" X 120"
THESE SPECS ARE FOR REFERENCE
28/37" X 120" LANSING G-28 HOLLOW SPINDLE ENGINE LATHE
SWING OVER BED.......................... 28"
SWING IN GAP............................ 37 3/4"
LENGTH OF GAP........................... 17"
SWING OVER CROSS SLIDE.................. 18 7/8"
SPINDLE NOSE............................ D1-15 CAMLOCK
SPINDLE BORE............................ 9 1/4"
DISTANCE BETWEEN CENTERS................ 120"
SPEEDS (16 GEARED SPEEDS)............... 8 TO 500 RPM
DIAMETER OF QUILL ON TAILSTOCK.......... 3 3/4"
TRAVEL OF QUILL ON TAILSTOCK............ 12"
RANGE OF LONGITUDINAL FEEDS............. 0.0028 TO 0.6912 IPR
RANGE OF CROSS FEEDS.................... 0.001 TO 0.275 IPR
THREADS (METRIC)........................ .25/56 mm
THREADS (WHITWORTH)..................... 4 TO 60 TPI
MAIN MOTOR.............................. 25 HP
OVERALL DIMENSIONS: 16'5" LONG, 4'9" WIDE, 5' TO TOP OF CHUCK
EQUIPPED WITH:
* TAPER ATTACHMENT
* 24" 4-JAW CHUCK MOUNTED ON FRONT AND 24" 4-JAW CHUCK ON REAR
* INCH/METRIC THREADING
* RAPID TRAVERSE
* 14" ROLLER TYPE STEADY REST
* FOLLOW REST
* THREAD DIAL
* METRIC, WHITWORTH, ENGLISH, MODUL AND DIAMETRAL THREADING
***** SEND MESSAGE FOR INFO*****
Additional Prep Fees May Apply