95% New Parts.
The Scope of Supply below is for - One (1) 24" Single Channel 2.0 Rotary Fan Press Skid System Unit. All equipment listed below is factory tested, pre-plumbed/wired and ready for field installation and connections. Sludge type, feed solids, volatile solids, pretreatment, polymer selection, desired cake solids and process variations will affect performance of the equipment.
1.5 hp Direct Gear Drive System, Epoxy Coated
Carbon Steel Housings and Base, Pneumatic Sludge
Discharge Gate Control, Pneumatic Flow Control, All 316
Stainless Steel/Hard Chromed Tapered Slotted Filter
Screens with Stainless Steel Support Wheels.
One (1) RFP Skid Platform, Epoxy Coated Carbon Steel
Welded Construction. Anchor Bolts To Be Provided By
Others.
One (1) Wash Manifold Assembly.
One (1) Stainless Steel Cake Discharge Chutes.
One (1) Dewatering Channel Mixing Element.
One (1) In-Line Full Port Pneumatic Mixer with 4-Port
Injection Ring.
One (1) PVC Sludge Retention Manifold with Clear Site
Tube Cleanout and Sludge Sampler.
One (1) PVC Filtrate Collection Piping Assembly.
One (1) Pneumatic Sludge By-Pass Control Valve.
One (1) Sludge Feed Magnetic Flow Meter.
One (1) Sludge Feed Pump (Rotary Lobe) with VFD Gear
Drive Direct Coupled On Common Base.
One (1) Air Compressor with Receiver.
One (1) Emulsion Polymer Feed/Blend System, with
Integrated Controls.
One (1) Auto Process Control Package (semi-unattended
operation) For System As Listed In This Proposal.
One (1) Central Operator Panel with Touch Screen
Controls, Ten Inch (10") Display, Lamps and Main
Disconnect Power.
System To Include Operation of Associated Dewatering
Equipment As Listed In This Scope of Supply,
480 Volt/3 Phase/60 Hertz (Unless Specified Otherwise),
NEMA 4X Rated Enclosure.
One (1) Electronic copy of Operational/Maintenance
Manual
Additional Prep Fees May Apply
