Extract analytes of interest from large volume aqueous samples easily and efficiently with the Thermo Scientific Dionex AutoTrace 280 Solid-Phase Extraction (SPE) Instrument. The AutoTrace 280 automates all four steps of SPE (conditioning, loading, rinsing, and eluting), reducing solvent consumption and improving recovery and reproducibility. Boost productivity and reduce cost of analysis by simultaneously processing up to six samples in 2-3 hours with only 15 minutes of operator involvement. The AutoTrace 280 meets requirements in US EPA methods including the 500 and 600 series.
Firmware Version v01.01.00
Improved reliability and recovery
Automated SPE minimizes operator intervention
Positive pressure loading and elution of samples and solvents provides constant flow for improved analytical precision
Flexibility in operation
Loads sample volumes from 20mL to 4L
Compatible with 1, 3, and 5mL cartridges and with 47mm SPE disks
Automatically conditions, rinses, and elutes SPE cartridges with a choice of five solvents
Offers a choice of four different collection vial racks
Improved laboratory safety
Minimal sample handling reduces operator exposure to hazardous chemicals
No hood required
Enhanced laboratory productivity and reduced costs
Unattended operation
Batch processing of up to 6 samples
Reduced solvent usage
Segregates aqueous and solvent waste using separate waste lines for efficient, cost-effective waste handling
Supports a range of matrices and applications
Ability to process samples containing suspended solids
Meets requirements for solid-phase extraction for U.S. EPA methods including 500 and 600 series
Recommended use
Analyze prepared samples with Thermo Scientific LC or GC systems for a fully integrated workflow
Manufacture Specification
Gas Regulator and Gas Gauge Range
Output- 0 to 0.14 MPa (0 to 20 psi)
Input- 0.69 MPa (100 psi)
Front Panel Display and Keypad
Display- Liquid crystal with adjustable contrast
Keypad- 3 status LEDs; 3 buttons for entering commands and selecting methods
Liquid Management
Air Push Syringe- 10 mL
Liquid Handling Syringe- 10 mL
12-Port Valve- Rotary
Air Push Valve- 3-way, PTFE
Switching Valves- 3 input ports to 1 output port; pump input port normally open
Nozzles- Stainless steel
Tubing- TFE, PEEK; most lengths critical
Solid Phase Extraction Configurations
SPE Cartridges- Syringe-compatible polymer cartridges: 1 mL, 3 mL, and 6 mL Syringe-compatible glass cartridges: 6 mL
Cartridge Plunger- Adapters available for 4 cartridge types
Extraction Disks- 47 mm
Sample Pumps
Displacement- Positive
Accuracy- 2.5%
Tube Fitting- Kynar
Piston and Liner- Ceramic
Additional Prep Fees May Apply