SARTORIUS STEDIM 16370 Tube Welder with Tube Holder Inserts for Sale

Sartorius Biowelder 16370 Tube Welder w/ Tube Holder Inserts

**Unit has visible wear from normal use. Has a dent on front right corner and a few small dents on the back but does not affect functionality. Power cord housing and addition connector is slightly chipped but also does not affect functionality. Everything pictured included. See photos for details.
Includes: Tube Holders

SH1 5/8 15.9 mm Outside Diameter inserts (1 set)
SH2 3/4 19 mm outside Diameter inserts (1 set)

The BioWelder works with a thermal welding cycle that does not require the use of a laminar flow. In this welding process the blade is kept sterile and endotoxin free throughout the whole process.

The inserted hoses will be cut by a blade and then fused together through the unit. The cycling process is completely automated and will only be released after a complete cycle.

Different programmable holders make it possible to weld thermoplastic hoses of the same type together (such as C-Flex, Sanipure, Pharmed) with diameters of 6.4 mm (1/4) up to 19.0 mm (3/4).

Features:
Fully automated operation
Welds thermoplastic tubing up to 3/4 inch O.D
Preinstalled settings for C-Flex, Raumedic FluiSoftTM, AdvantaPure, AdvantaFlex, Pharmed and Sanipure tubing
True thermal weld provides exceptional strength
Aseptic connection without a laminar flow hood
Data output by a printer
Compact design, portable
Easy to validate, with validation equipment
Can weld many different tube diameters

Manufacturers Specifications:
Housing: stainless steel
Interface: RS232 for printer
Blade: Cr-Ni-Alloy, single-use
Ambient Temperature 20C 30C(ideal: 22C)
Relative Humidity: 20% 80% (ideal: 60%)
Temperature Sensor: Type K, calibration
Max. Tube OD: 3/4
Min. Tube OD: 1/4
Welding Cycle: 6090 sec. depending on tube dimensions

Additional Prep Fees May Apply