DESCRIPTION:
Among the different milling systems known at present, the jet mill is, without doubt, the most suitable for the micronizing of chemical and pharmaceutical products. Thanks to its very well established and particular working principle it is able to meet numerous demands of fineness until to obtain, without the help of moving and classifying parts, micronized particles typically 100% below 5micron. This is a result that cannot be achieved by more conventional mills having different conception.
SECTORS OF USE:
Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing.
MAIN FEATURES:
Product particles are fed into the milling chamber through a Venturi injector. High-velocity air is introduced into the mill through jet nozzles placed around the circular chamber of the mill. Particles are consequently accelerated inside the milling chamber and dragged in a vortical movement causing them to collide repeatedly. They break up into progressively small particles until the accumulated energy is reduced to negligible values. The exhausted air carries micronized particles into a suitable cyclone-filter. At the inner of the cyclone-filter the air is dedusted through a set of filtering bags, in special fabric, and discharged to the outside. Reverse jets of compressed air periodically shake filtering elements causing product removal from fabric. Micronized product collection takes place into the bottom hopper of the cyclone-filter. Due to the absence of moving parts and classifying devices the mill is practically maintenance free and therefore substantial cost saving is achieved.
Type: DS30 – M100 – FG01
Year of construction: 2007
Click Link to View Manufacturer’s Information
TECHNICAL DATA
Length mm 1000
Width mm 720
Height mm 1000
Net weight Kg 100
Additional Prep Fees May Apply
