Specifications:
-Process Gas: Hydrogen (Suitable For Use With Other Pure Inert Gases)
-Maximum Discharge Pressure: 6,000 PSIG
-Inlet Pressure Range: 800 To 6,000 PSIG
-Capacity @ 2,000 PSIG, 80 Deg F: 33.6 Kg/hr (239 SCFM)
-Motor: 60 HP NEMA Class 1 Division 2, TEFC
-Power: 460v, 3ph, 60hz
-Control Power: 120v, 1 Ph, 60hz
-Ambient Operating Temperature: 50 To 100 Deg F
-Cooling Requirement: 15 GPM @ 60 To 80 Deg F
Includes:
-Explosion Proof Reciprocating Circuit
-Gas Aftercooler
-Explosion Proof Oil Reservoir Heater
-On/Off Pressure Control - Allows the operator to input high and low discharge pressure set points to start and stop the compressor.
Included On The On/off Pressure Control
-Full Voltage 460v, 3ph, 60hz Motor Starter
-NEMA 4 Enclosure
-Start And Stop Push Buttons
-Control Power Transformer
-Hour Meter
-Controller With Dual Set Points
-Discharge Pressure Transducer
The electrical enclosure that houses the controller and the motor starter requires installation in a non-hazardous environment. Necessary intrinsically safe barriers are included.
Additional Prep Fees May Apply