Extend the capabilities of the Thermo Scientific Vanquish UHPLC platform by adding all the flexibility you can expect from a state-of-the-art binary high-pressure solvent blending. The biocompatible Thermo Scientific Vanquish Binary Pump F incorporates our SmartFlow pumping technology, which ensures excellent flow and gradient precision in your liquid chromatography (LC) system, independent of eluent composition and backpressures up to 1034 bar. This gives you unrivaled retention time precision and highest data confidence. The binary high-pressure mixing results in short analysis time and high sample throughput.
Manufacture Specification
Flow Accuracy: 0.1%
GLP Features:
Predictive Performance functions for scheduling maintenance procedures based on the actual operating and usage conditions of the pump.All system parameters logged in the Chromeleon CDS software Audit Trail.
Flow Precision: <0.05% RSD or <0.01 min SD, whichever is greater
Gradient Formation: Low-pressure gradient proportioning
Pressure Range:
2 to 103 MPa (20 to 1034 bar, 290 to 15000 psi)
I/O Interfaces:
2 x 6 pin Mini-DIN connectors each having functionality: 1 input, 1 relay out, 1 bidirectional input/outpt
No. of Solvents: 2 of 6
Proportioning Accuracy: 0.2% (of full-scale)
Proportioning Precision: <0.15% SD
Wetted Parts: MP35 N, titanium, ceramics, sapphire, PEEK, UHMW PE, fluoropolymers
Compressibility Compensation: Fully automated, independent of the composition of the mobile phase
PC Connection: USB 2.0; 3-port-HUB to connect further Vanquish modules
Safety Features: Leak detection and safe leak handling, excess pressure monitoring
Temperature Range: 5C to 35C
Pressure Ripple: Typically <1.0% or <0.2 MPa, whichever is greater
Voltage: Power Requirements: 100 - 240 V AC, 50/60 Hz, max. 245 W / 255 VA
Biocompatible Version: Yes; pH range 2 - 12, chloride concentration up to 1 mol/L
Max. Flow Rate: 8 mL/min
Min. Flow Rate: 0.001 mL/min
Type: Serial Dual-Piston Pump
Additional Prep Fees May Apply