EDWARDS Vacuum Pump with Silent Case and Compressor Motor | Vacuum Pumps

    Browse our other
    Vacuum Pumps

    Item Details

    Item Id 366972
    Item #: 366972
    Item: EDWARDS Vacuum Pump with Silent Case and Compressor Motor
    Model #: N/A
    Serial #: N/A
    Year Built: N/A
    Location: California
    Price: $1,650.00

    Description

    EdwardsE2M28 Vacuum Pump,Silent Case & Jun-Air OF302 Compressor

    Used - unit is in very good working condition, has slight cosmetic wear from regular use, please see photos for details. Includes everything pictured.

    Unit will be tested before shipping.

    Edwards E2M28: The E2M28 pump is a two-stage, direct drive, sliding vane pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor. The motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart. An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suck-back unless the gas ballast valve is open. You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has two oil drain-plugs to allow either gravity oil drain or pressure oil drain.

    Features and Benefits
    The pump is designed for reliable, long-term operation. Thermal overload device prevents overheating (single-phase only). The pump is a free-standing unit. The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor. The motors are totally enclosed and are cooled by the motor cooling fan. Easy to use controls. Pressure die cast oil box with integral oil seals prevents oil leaks. Gas ballast valve for large water vapour handling capacity. Externally approved to EN61010, CSA, C22.2 and UL61010. Oil distribution valve. Pumping chambers are air-tight. Oil sight-glass, two oil drain-plugs, inlet-port and outlet nozzle all fitted as standard. Gas-ballast control.

    Please note: Due to shipping regulations, all vacuum pumps will be shipped without pump oil. Oiled vacuum pumps SHOULD NOT be run without oil.

    EMF20 Oil Mist Filter:
    Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pump or pump oil. The EMF20 mist filter can be used on low-pressure applications. They are very efficient at 99.999% DOP test and are also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. The EMF filters have a unique odor element which neutralizes the smell of oil mist.

    Jun-Air OF302:
    Performance Summary: Model OF302
    System Type Motor Market Medical / Lab / Dental / Industrial Displacement (50 Hz) 3.81 cfm (108 l/min) Displacement (60 Hz) 4.87 cfm (138 l/min) FAD @ Max Pressure (50 Hz) 1.34 cfm (38 l/min) FAD @ Max Pressure (60 Hz) 1.55 cfm (44 l/min) Max Pressure 120 psig (8 bar) Noise Level (50 Hz) 65 dB(A) Noise Level (60 Hz) 66 dB(A) Features: Quiet (ultra-quiet in cabinets) Modern design Low noise and vibration level State-of-the-art performance Highly efficient Flexible installation Easy maintenance Integrated filtration 100% duty cycle, runs continuously.
    Additional Prep Fees May Apply

    Shipping

    Height: 36.00 in
    Width: 36.00 in
    Length: 36.00 in
    Weight: 100.00 lbs
    Prep Fee: N/A
    Registered Customers can request shipping quotes free of charge. Shipping Quotes take 1-3 Business Days to Process

    charticon This item has  today
    moneyicon Have one to sell?
    Sell
    Need Financing? FinanceLink

    Testimonials

    • "The biggest demand for manufacturers today is to become operational as quickly as possible and Bid on Equipment provides this solution." - Dave M.
    • "The strength of their site is how often our machinery comes up on web searches." - John G.
    • "We appreciate BoE... Always helpful, friendly and very professional." - Ali L.
    • "If you have questions about machinery you're buying they will find someone who can help. Everyone I talk to here is very friendly." - Tim Y.
    • "BoE is a powerful site that has yielded great results for our company. If you need to buy or sell equipment, I recommend this site." - Michael M.
    • "BoE keeps the engine turning and its potential is limitless. They take out the nonsense that you find on auction sites." - George P.
    • "I have sold 2 large Electric Motors through Bid On Equipment. They got them sold within a month!" - Richard B.
    • "The best thing to happen to our company, the personnel are fantastic..." - Ron W.